Polishing Auto Dings: Dremel Rotary Tools


What I’m doing is fastening the buffing cloth to the mandrel here and then tightening the finger tight then what i’m going to do is just fasten it to the Dremel Rotary. and go out to the car where it needs buffing. I’m putting a little wax on here, gong at low speed. And then what I do is then just go to the car here and I buff on it. It doesn’t take a whole lot. And there’s another spot right over here to work at. Then I’m going to get the rag and polish it off. Alright looks good to me.

17 Comments

  1. MattDuffy88 August 12, 2009 at 7:27 pm

    Wouldn't some Megs #80 on a finishing pad via rotary or DA polisher be much better for the paintwork instead of a dremel and wax?

  2. George Villalobos September 2, 2009 at 3:35 am

    a lot of dremels have variable speeds.

  3. m0bov December 31, 2009 at 8:09 pm

    Clean the car first, use something abrasive, then wax it by hand!

  4. m0bov December 31, 2009 at 8:10 pm

    Don't think he really knows anything about detailing, but thinks he does!

  5. terenhas March 5, 2010 at 12:01 am

    If you have a shitty one

  6. Mohammad Nadjafi May 10, 2010 at 10:00 pm

    good luck cleaning the whole car with that mall brush

  7. vtec92civic May 13, 2010 at 6:49 pm

    that's just horrible. Wax isn't for polishing it serves as a protectant. Also, using a dremel is not very wise and would take you a year to wax or polish the vehicle with that thing.

  8. TheSoulKeeper7 November 17, 2011 at 8:40 pm

    Lots of time on your hands, use a dremel to wax your car

  9. bluebird1422 December 22, 2011 at 10:39 pm

    lol, waxing your car with dremel? are u retired or just want to spend a day on pointless job?

  10. Maafa 1619 January 1, 2012 at 3:27 pm

    @m0bov There are plenty of waxes that have a light abrasive. Light scratches can easily be buffed out with such products.

  11. m0bov January 1, 2012 at 5:19 pm

    @Maafa1619 Such as?

  12. plateletsck May 27, 2012 at 5:30 am

    apparantly he was repairing scratches on the clear coat only, not waxing the whole car.

  13. Chris Torelli April 20, 2013 at 4:11 pm

    been detailing for over 20 years this got me good what a baby polisher use it all the time but on small items wash dry clay compound glaze seal with a cyclo buffer or by hand use polishing compound by hand works good you really dont a buffer your hand pressure will out polish that dremel

  14. mrBDeye September 26, 2013 at 3:43 am

    I will not attempt this on my car.

  15. fAnTA June 16, 2014 at 8:24 am

    why would you do that on a filthy car? Surely clean the whole car first?

  16. Dude...Are you sure?? March 4, 2015 at 4:28 am

    dude… what the hell? that doesn't fix the ding….?  so you waxed a dinged area  for what?  that ding is still there after you wiped off the wax… only difference is the ding is now waxed… ? LAME….

  17. Random Acts of Video October 19, 2015 at 12:18 am

    So you filled in the ding with wax.

Leave a Comment

Your email address will not be published. Required fields are marked *